The WPC12Q cutoff wall pack luminaire is available with a choice of optical distributions designed to replace HID lighting systems up to 175w MH or HPS. Typical wall mounted lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 8 to 15 feet can be used based on light level and uniformity requirements.
Die Cast Hinged and Gasketed Aluminum Front Frame and Housing with 1⁄2” Coin Plugs. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable.
Listing & Ratings:
CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment.
Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request.
Tempered Clear Flat Glass Lens
Cast-in Template for Mounting Directly Over a 4” Recessed Outlet Box, or Use 1⁄2 Surface Conduit.
Array: 15w, System: 15.8w; (150w HID Equivalent)
Array: 21.7w, System: 23.7w; (175w HID Equivalent)
Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps.
Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers.
5-Year Warranty for -40°C to +40°C Environment. See Page 3 for Projected Lumen Maintenance Table.